How to choose downlights

How do I choose downlights for my self-build project?

“What type of downlights should I use in my new-build” is a question which raises its head in the early stages of a building project. “Should I go for dedicated LED downlights or use fittings that will take retro-fit LED lamps?”

What type of downlights should I use in my new-build

Here are some tips that I can offer from my experience as a lighting designer.

Designer Downlights

Recently some clients had fallen in love with an LED downlight by a renowned design company and wanted to incorporate these in their lighting scheme. The fittings were beautiful with the light source set back (always recommended), a gold domed interior and a minimal trim giving all the benefits of trimless without the complication of needing to be plastered in.  In addition the fitting had a wide variety of specialities that could be incorporated such as beam angle, colour temperature, CRI, light source and dimming protocol.

The fitting was a beauty but there was only one problem – price. These designer downlights don’t come cheap and although of prime quality, incorporating these in a full house design can drive up the budget exponentially so they are not usually the average self-builder’s first choice.

Dedicated LED Downlights

Whilst you may not want to blow the budget on the top designer downlights my ethos is that if you are going to incorporate dedicated LED downlights then you need to go for the best for these reasons.

Colour Temperature and CRI

These are not the same thing – Colour Temperature relates to the warmth of the light emitted and CRI (Colour Rendering Index) means how colours will look under the light. The higher the CRI the better the colours will look (more akin to natural sunlight) and lower the colour temperature the warmer the light.  Generally the better quality downlights will allow for 2700°K and 90 CRI but you would be hard pushed to get this from a standard cheaper version.

Low Glare

There is nothing worse than dazzling glare from downlights so the light source should be set back, either within a dome or with a baffle such as these below. A dark baffle or dome will absorb more glare and a gold or copper toned dome will warm the light further.

Low Glare Downlights copy

Longevity

The guarantee issued by the manufacturer is only as solid as the manufacturer issuing it and manufacturers can merge, reform or go into administration. Technology can fail and LEDs are no exception so try and ensure that you purchase dedicated LEDs from quality suppliers and don’t pay too much attention to the 10 year guarantee.  Even when all is well with the manufacturer/supplier over the years your LEDs will change slightly in terms of colour and output and replacing one failed LED with a brand new replacement will often ‘jar’ in the existing overall scheme.

Output

In residential situations this is usually more of an issue where ceilings are high as a more punchy amount of light will be required to travel the distance. Retro-fit lamps can’t get quite such high output as a dedicated LED fitting although in most domestic situations I don’t find this is an issue.

Alternatives

So, whilst good quality dedicated downlights may tick all the boxes in terms of function and design, the price and longevity issues make it worth considering the alternatives.

Various Downlights

LED lamps

The quality of retro-fit LED lamps has vaulted in the past few years with excellent colour temperatures and CRI and even the facility to warm the temperature as they are dimmed – perfect for dining rooms.

Just caste your mind back to when lighting was easy. The ‘bulb’ died and you popped another in within a matter of minutes.  Things have now come full circle but with a difference – the ‘bulbs’ are LED GU10s or MR16 lamps and the need to change them is rare though much easier than calling in an electrician to replace a dedicated LED fitting.

Mains or Low Voltage Fittings

There are still many low voltage downlights available, particularly from Europe, although my feeling is why have a transformer when you can avoid one more link in the chain that could go wrong. When the budget is restricted my tendency is to specify good quality Mains downlights that take LED GU10s, most of which cost about £100 less than the designer light I mentioned at the beginning.  Worth thinking about.

 

Top Tips

Avoid ‘runways’ of lights – concentrate on where the light is actually going to fall

Don’t have all downlights on the same circuit – this will help manipulate the ambience

Ensure that fire hoods are used where necessary if fittings are not Fire Rated

Avoid using downlights in vaulted ceilings – insulation will be compromised

Future proof your project – go for the best LEDs or choose standard fittings with LED GU10s

 

This post was written by

Claire Pendarves – Lighting Designer and Design Director of Luxplan

We offer a lighting design and specification service throughout the UK

 

 

 

Comments are closed.